0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Bridge erection methods

Structures in this category

  • entry with pictures
  • new entry (30 days)
  • updated entry (14 days)
# Name Country
1 1915 Çanakkale Bridge Turkey
2 3D Bridge Spain
3 A 17 Mondego River Bridge Portugal
4 A 43 Bridge across Ruhr and Mühlengraben Germany
5 A 64 Overpass France
6 A-5 Guadiana River Bridge Spain
7 A-5 Tajo River Bridge Spain
8 A-6 Miño River Bridge Spain
9 A1 Motorway Bridge Italy
10 A1 Reno River Bridge Italy

List of all structures in this category

Media

Erdberger Steg
image credits (ID:430562)

Available with
Structurae Plus/Pro

Nordsternbrücke (U81)
image credits (ID:394903)
Nordsternbrücke (U81)
image credits (ID:394916)
Rhine Bridge Hard - Fussach Part 2 - The Steel Construction : Due to the high damage potential in case of a possible flood , the discharge capacity of the Rhine is to be expanded from 3,100 m³/s to a maximum flow rate of 4,300 m3/s (HQ300). The 255 m long Rhine bridge between Hard and Fußach must therefore be adapted to ensure the primary framework conditions for flood protection. In addition, the standard cross-section of the supporting structure no longer meets today's traffic engineering requirements. The new Rhine bridge Hard - Fussach, which is planned as a 4-span steel composite bridge with a dissolved cable structure, has three new piers, of which two of the pylons support the cable structure. The structure (4-span girder) has span lengths of 50 m, 125 m, 50 m and 31,6 m. This results in a total span of 255.60 m. The stiffening of the structure above the main span supports is in the form of a harp-shaped span. Due to the low height of the four masts and the resulting shallow inclination of the cables, this is a resolved cable structure that helps to optimize the overall stiffness in the area of the river piers. The architecturally designed steel masts, which consist of a rectangular steel box cross-section, have a height of approx 12m. Construction phase Substructure: Construction work began on schedule at the end of June 2020 with the creation of the site set-up area and the establishment of the construction site. In September 2020, work on the substructure of the bridge was carried out at full speed in the foreland of the Rhine. The winter half-year 2020/2021 was decisive for the construction schedule, as important work could only be carried out during periods of low water discharge. The construction of the substructure and the auxiliary piers in the area at risk of the Rhine were carried out in the winter half-year and thus during periods of low water discharge. Construction phase: Steel construction The steel superstructure of the Hard-Fußach Rhine Bridge is divided into a total of 17 individual sections and 2 pylons per main girder side. This results in a total of 38 components, the so-called sections. The individual steel components were manufactured in the steel construction plant of the consortium partner in the Czech Republic and Hungary as well as in Austria and then delivered to the construction site. The philosophy was to prefabricate the largest possible components in the factory. The largest individual parts weigh up to 90 tons, resulting in a reduction to 66 special transports. The supporting structure was pre-assembled and finish-welded on the west side of the Rhine in a temporarily erected factory hall in Fußach, and protected against corrosion before being pushed into place. The on-site factory hall was necessary in order to be able to carry out the welding and coating work protected from wind and weather. On February 2021, the two steel box girders were pushed in for the first time using the so-called incremental launching method. Shifting will be carried out in the period from February 2021 to September 2021 and is divided into a total of 10 attachment phases and 10 shifting phases with different shifting lengths of approx 6 to 45 meters. After each shifting phase (cycle), additional steel components are delivered and connected to the already erected supporting structure. Shifting was carried out almost in the final position
image credits (ID:427676)
Rheinbrücke Hard–Fußach
image credits (ID:427696)
Rheinbrücke Hard–Fußach
image credits (ID:427694)
Rheinbrücke Hard–Fußach
image credits (ID:427693)
Rheinbrücke Hard–Fußach
image credits (ID:427689)

Subcategories

3D-Printed Bridges
image credits (ID:299551)
3D-Printed Bridges
Balanced cantilever method
image credits (ID:1423)
Balanced cantilever method
Balanced lift method
image credits (ID:1)
Balanced lift method
Cantilever construction using temporary cable-stays
image credits (ID:4316)
Cantilever construction using temporary cable-stays
Cantilever construction using temporary stays in vertical position, then rotation into horizontal
image credits (ID:142290)
Cantilever construction using temporary stays in vertical position, then rotation into horizontal
Composite prefabricated girders with in-situ deck slab
image credits (ID:88013)
Composite prefabricated girders with in-situ deck slab

Available with
Structurae Plus/Pro

Subscribe
Floating
image credits (ID:215884)
Floating
In-situ casting on falsework
image credits (ID:242307)
In-situ casting on falsework
Incremental launching
image credits (ID:2221)
Incremental launching
Lateral / transverse launching
image credits (ID:181681)
Lateral / transverse launching
Longitudinal launching
image credits (ID:103170)
Longitudinal launching
Movable Scaffolding Systems
image credits (ID:15576)
Movable Scaffolding Systems

Available with
Structurae Plus/Pro

Subscribe
Placement by crane
image credits (ID:349501)
Placement by crane

Available with
Structurae Plus/Pro

Subscribe
Placement by floating crane
image credits (ID:400390)
Placement by floating crane
Precast concrete elements with in-situ joints
image credits (ID:1)
Precast concrete elements with in-situ joints
Precast girders with cast-in-situ slab
image credits (ID:48199)
Precast girders with cast-in-situ slab
Precast segmental construction
image credits (ID:4830)
Precast segmental construction
Rotation around a horizontal axis
image credits (ID:93691)
Rotation around a horizontal axis
Rotation around a vertical axis
image credits (ID:76855)
Rotation around a vertical axis

Available with
Structurae Plus/Pro

Subscribe
Suspension bridge deck erection methods
image credits (ID:1)
Suspension bridge deck erection methods

Available with
Structurae Plus/Pro

Subscribe
Suspension cable erection methods
image credits (ID:1)
Suspension cable erection methods

Bearings Slid in Piggyback-Style

Once completed, the new railroad bridge over the Drava River in Carinthia, Austria, will function with a unique combination of sliding isolation pendulums and brake dampers. The load-bearing structure slides over the bearings for slow an ... [more]

Neckar valley bridge is moved much more cheaply thanks to special engineering idea

The Nuremberg engineering office K+S Ingenieur-Consult GmbH & Co. KG - in close cooperation with Hochtief Infrastructure GmbH and on behalf of BauArge A6 West - has planned and helped to prepare the tran ... [more]

Reconstruction of the “Terfener Innbrücke” in Austria’s Inn Valley

The Terfener Innbrücke reconstruction project on the A12 motorway in the Inntal valley is one of largest bridge construction projects currently being carried out in the west of Austria. For reasons of e ... [more]

More reports

Literature

  • Bianchi Di Castelbiancho, F. (1971): Bridge construction. Presented at: IABSE Symposium: Etude à la résistance post-critique des poutres à âme pleine et des poutres-caissons = Bemessung von Blech- und Kastenträgern im überkritischen Tragbereich = Design of Plate and Box Girders for Ultimate Strength, Praha, CSSR, 1971.

    https://doi.org/10.5169/seals-9524

Find a Structure or Project ...

Recently Added

Erdberger Steg

Austria (2022), added on 29/12/2023

Klinkerhafenbrücke

Germany (1986), added on 21/11/2023

Clifford Hollow Bridge

USA (2004), added on 10/11/2023

More new entries

Recently Modified

Golden Gate Bridge

USA (1937), modified on 24/04/2024

Semorile Viaduct

Italy (1968), modified on 22/04/2024

Mancunian Way Viaduct (West)

United Kingdom (1965), modified on 18/04/2024

More updated entries

Recently Illustrated

Semorile Viaduct

Italy (1968)
2 new media added on 21/04/2024

Golden Gate Bridge

USA (1937)
10 new media added on 18/04/2024

Entrance Gateway Metrolink Bridge

United Kingdom (2006)
8 new media added on 16/04/2024

More illustrated entries
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine